International Symposium

International Symposium
Surface Engineering. New Composition Materials. Welding
25-27 March, 2009, Minsk, Belarus
Venue: Minsk, Exhibition pavilion, Pobediteley Ave., 14, conference-hall

            Registration of participants:
24th March, 2009: from 10.00 till 18.00 at the booth of the State Research and Production Association of Powder Metallurgy
25th March, 2009: from 10.00 till 10.50 at the entrance in the conference-hall
26th March, 2009: from 10.00 till 10.50 at the entrance in the conference-hall
27th March, 2009: from 10.00 till 10.50 at the entrance in the conference-hall

March 25
11.00 Symposium opening. Welcoming speech of D.Sc., Prof.  Ilyushchenko A. F., the Director General of the State Research and Production Association of Powder Metallurgy of NAS of Belarus

1115-1200 PLENARY MEETING
(co-chairs – D.Sc., Prof. Ilyushchenko A.F., D.Sc., Prof. Korolev Yu. M.)
Vityaz P.A., Ilyushchenko A.F., Petyushik E.E., Syroezhko G. S. Technology expansion of composition materials and that use in technique
Korolev Yu.M., Lyulko V.G. Powder metallurgy in Russia:  conditions and development prospects
Andreev M.A., Manoylo E.D., Shevtsov A.I., Chigrinova N.M. Advanced technologies for protective coatingmaking

1200-1400 Section 1 “Surface engineering”
Co-chairs: Ph.D. Andreev M.A., D.Sc., Prof. Pribytkov G.A.
Bely A.V., Kononov A.G.,  Kukareko V.A. Structure and tribotechnical characteristics of alloy Zr-2,5%Nb modified  by nitrogen ions
1220-1240 Coffee-break
Zemtsova E.G., Smirnov V.M. Engineering of nanostructured function-gradient nitride coatings on the steel surfaces to engender additional functional properties
Komarov A.I., Komarova V.I., Shipko A.A.  The impact of fullerenes on the structure of friction surface and  tribotechnical characteristics of friction pair MAO-coating – steel
Lomovoy V.V., Stankevich E.V., Tyavlovskaya E.A., Belyavsky N.M. Nanocomposition amorphous diamond-like carbonic coatings modified by copper nanoklaster
Pribytkov G.A., Andreeva I.A., Gurskikh A.V. Properties and use of nanostructured nitrid coatings (Ti, Cu)N, (Ti, Si)N, (Ti, Al)N, (Ti, Al, Si)N obtained by vacuum-arc spraying of sintered multi-component cathodes
1400-1500  Break
Poster session: at the conference-hall entrance from 1100-1700
Gurchenko P.S., Mikhlyuk A.I., Solonovich A.A., Konstantinov V.M., Strizhevskaya T.N.  Analysis of some mechanisms of parts deformation by surface hardening during the RF-current heating
Kardapolova M.A., Devoyno O.G., Ratko E.F., Fedoruk G. Tribological characteristics of tool steel surface coating after combined treatment
Kuznetsova T.A., Andreev M.A., Markova L.V. Tribotechnical characteristics of the thin combined coatings on chrome base
Luneva N.K., Petrovskaya L.I.  Intumescence protective compositions for wood
Maksimchenko N.N. The influence of operating conditions of composition coating process by flexible tool on the thickness of the shaped course
Panteleenko F.I., Sarantsev V.V., Borovik D.I. Transformations arising in composition electrochemical coatings under the thermal impact
Prishchepov A.S., Senyut V.T., Boginsky L.S. Surface modification of quartz plates to create sensitive indicators of condensable moisture
Savich V.V. Oxidation technologies of surfaces of titanium and titanium alloys samples
Sudnik L.V., Yakubovskaya S.V., Deshkovskaya A.A., Goransky G.G. Nanostructured coatings in the tool ceramics
Syroezhko G.S., Leshok A.V., Zvonarev E.V.   The way to obtain the friction disks using soldering
Tyurin Yu.N., Kolisnichenko O.V., Khrebtov A.V. Pulse-plasma treatment of the working surface of tool
Tyurin Yu.N., Golovenko S.I., Khrebtov A.V. Electrolyte-plasma long-wearing pattern formation on the drive shafts surface in the plain bearing
Fomikhina I.V., Lisovskaya Yu.O., Alekseev Yu.G., Korolev A.Yu., Niss V.S. The influence of electrolyte-plasma treatment on the structure and properties of surface coatings

1500-1700 Section 2 “Protective coatings”
Co-chairs: D.Sc. Devoyno O.G., Ph.D., Prof. Pihl Toomas
Formanek B., Szymański K., Bielajew A., Letsko A., Talako T., Ilijuszenko A. Advance composite materials of thermally sprayed erosion and corrosion resistance coatings for increase durability of elements of power energy boilers
Devoyno O.G., Dyachenko O.V., Vasilenko A.G. Formation technology of slip coatings of iron-based powder materials by laser alloying
Devoyno O.G., Kardapolova M.A., Yatskevich O.K., Lutsko N.I. The influence of modificating elements on the tribological characteristics of ceramic coating on aluminium oxide base
Ilyushchenko A.F., Shevtsov A.I., Okovity V.A., Mikutsky V.A., Astashinsky V.M., Kuzmitsky A.M., Kozorez A.S. Coatication of hardened gas-thermal composition coatings made of clad powder
Ulyanova T.M., Shevchenok A.A., Titova L.V., Fomikhina I.V., Luchenok A.R. Physical and stress-strain properties of composite ceramics made of refrectory oxide powders
Sheleg V.K., Bokhan S.G., Prisevok A.F., Smetkin V.A. The analysis of adhesive strength of gas-thermal coatings with part surface

Poster session: at the conference-hall entrance from 1100-1700
Pihl Toomas, Vainola Vello, Pihl Riina The use and properties of thermo-barrier coatings
Andreev M.A., Markova L.V., Moyseychik A.N. Structure of solid lubricant coatings on cobalt base with volumetric content of solid lubrication
Basinyuk V.L., Zavedeev V.V., Glazunova A.A., Mardosevich E.I. Automation of mechanical characterization of coatings made of composite materials
Belotserkovsky M.A., Pryadko A.S., Konstantinov V.M., Tkachenko G.A. Hardening of chemicothermal coatings sprayed of steel wire
Dubkova V.I., Krutko N.P., Komarevich V.G., Belyasova N.A., Belotserkovsky M.A., Chekulaev A.V. Bioprotective powder compositions on the basis of thermoplastic polymers
Koleshko V.M., Gulay A.V., Shevchenok A.A., Andreev M.A. The synthesis of thin zinc oxide film under the vacuum spraying of ceramic target
Komar V.V., Pokhodina T.A., Kulinich N.V. Anticorrosive coats on the basis of epoxy-polyester powder paints
Manoylo E.D., Onashchenko F.E. Some properties of coatings deposited by high-spread flame spraying of composite powders which include nanoparticles
Chigrinova N.M., Chigrinov V.E., Chigrinov V.V., Paustovsky A.V., Alfintseva R.A., Sheludko V.E. The search of mass carries while coating formation on the basis of multicomponent systems by high-energy and ultrasonic influence methods
Okovity V.A.., Shevtsov A.I., Ilyushchenko A.F., Panteleenko F.I., Devoyno O.G., Panteleenko A.F., Okovity V.V. The plasma coating modification by methods of high-energy treatment
Semenchenko M.V., Dashkevich V.G., Gubanov A.S. Diffused-alloy wire material for protective coatings
Stefanovich A.V. Structure formation of fused coatings made of diffused-alloy wastes of tool steel.
Tkachenko G.A., Khina B.B.  Local diffusion antiwear coating on the fastening elements
Chigrinova N.M. Control mechanism of technology of anodic microarc oxidation to obtain coatings of given thickness and quality

March 26
1100-1400  Section 3 “Advanced composite materials technologies and their properties”
Co-chairs: D. Sc. Gorokhov V.M., D.Sc., Prof. Dorofeev V.Yu.

Vasilyeva E.S., Kim B.K., Kim D.S., Ignatiev M.B., Kovalev E. Production of nanostructured tungsten dichalcogenides by CVC method for application as solid lubricants
Ageenko A.V., Mazyuk V.V., Rak A.L. Production processes for powder capillary structures of contour heat pipes by nonshrinking sintering method
Vityaz P.A., Ilyushchenko A.F., Sudnik L.V., Mazalov Yu.A., Bersh A.V., Stepkin M.O. Equipment, technology and properties of alumina nanostructured powder. Composite materials on the basis of it
Dorofeev V.Yu., Kochkarova Kh.S. The influence of charge original components mechanical activation on the interparticle joining quality of hot-deformated iron-based powder materials
Ilyushchenko A.F., Sudnik L.V., Poddenezhny E.N., Suvalov V.M. Prospects in using microwave radiation energy in processes of metal- and ceramic composites producing
Klimova O.G., Tolochko O.V., Cheong D.-I. Activated sintering of composite materials W-HfC

1230-1245 Coffee-break
Kulik V.I., Kulik A.V., Ramm M.S. Modeling and computational investigation of liquid-phase process for silicon-carbide ceramics producing by reactive sintering method
Kulik V.I., Nilov A.S., Garshin A.P., Zagashvili Yu.V., Ryabikov S.E., Savich V.V., Shipitsa N.A., Ilyushchenko A.F., Dmitrovich A.A. Materials on the basis of silicon-carbide ceramics for tribotechnical purposes
Lyapina K.V., Melnichenko T.V., Ustinov A.I., Perekos A.E. Properties of iron nanoparticles being in the sodium chloride matrix
Reut O.P., Boginsky L.S., Sarantsev V.V. Improvement of technology, equipment and tools for dry isostatic pressing of high technology goods made of powder materials
Romanenkov V.E., Petyushik E.E., Afanaseva N.A. Capillary structure formation of heat pipe in the form of thin layer made of aluminium powder
Savchuk P.P., Kostornov A.G. Optimization of epoxy composite structure and properties

1415-1500  Break
Poster session: at the conference hall entrance from 1100-1700
Akimenko V.B., Gulyaev I.A., Kalashnikova O.Yu., Sekachev M.A. Iron powders in Russia
Reut O.P., Boginsky L.S., Yakubovsky A.Ch., Yarmolinsky V.I. Contact join isostatic reduction of superconducting cables of thermonuclear reactor core
Gorokhov V.M., Zvonarev E.V., Zarapina I.G., Ilyushchenko A.F., Kireev P.N. Structural complex shape goods producing from low-alloy steel powder by cold and hot metal powder pressing methods using multi-adapter press TPA 500-3HP and high-temperature oven with walking beam WBSX-40-125/e
Gorokhov V.M., Tarusov I.N. Powder aluminium alloys for antifriction purposes produced by activated sintering and plastic straining methods
Goryachev Yu.M., Dekhtyaruk V.I., Malakhov V.Ya., Siman N.I., Fiyalka L.I. Photovoltaic thermoelectric properties of laminar composites on the basis of InN – (Pr, Y)O
Dyachkova L.N., Talako T.L. Analysis of influence on the structure and properties of iron-based powder material by addending mechanoactivated powder oxides
Zabolotny O.V., Sychuk V.A., Kushneruk Yu.V. Producing problems of advanced composite materials on the iron base
Kaptsevich V.M., Boginsky L.S., Kusin R.A., Korneeva V.K., Krivaltsevich D.I., Zakrevsky I.V., Chugaev P.S., Petrikevich M.E. Constitutive and hydrodynamic properties of filter materials made of copper fibres obtained by dry isostatic pressing method
Lyulko A.V., Gritsenko V.V., Chan Man Tung, Babets A.V., Lyulko V.G., Karpyak R.N. Fractographic  researches of iron-based composite materials
Maslyuk V.A., Yakovenko R.V., Mamonova A.A., Deymontovich V.B. Structurization and properties of wear- and corrosion- resisting carbidosteel including Cr3C2 and TiC obtained by various methods
Mironov V.A. Composite materials Al-W-B
Panasyuk O.A., Maslyuk V.A., Vlasova O.V., Kurovsky V.Ya., Lyulko V.G., Minitsky A.V. Powder laminated nonretentive materials with anisotropic properties
Poberezhny S.V., Shelekhina V.M., Isupov M.A. Hard metal on the basis of tungsten carbide alloyed by microdispersed additives of different chemical nature
Senyut V.A., Markova L.V., Tamzaleva T.V., Koleda V.V. Application of high resolution SEM during the analysis of dimensions and form of the diamond powder after sintering
Smorygo O.L., Leonov A.N., Mikutsky V.A., Ilyushchenko A.F., Sadykov V.A. Physical and mechanical properties and structural parameters of high-porous materials plastic deformed
Tumilovich M.V., Pilinevich L.P., Bedenko S.A., Taraykovich A.M., Sheko G.A. Analysis of porous material from nanodimensions powders producing using ultrasonic and vibration impact

1500-1700 Section 4 “Application of composite materials in technique”
Co-chairs: D.Sc., Prof. Kaptsevich V.M., Ph.D., Prof. Narva V.K.

Ageenko A.V., Mazyuk V.V., Rak A.L. Composite capillary-porous materials for thermal control of heat-exchange and filter equipment
Azarov S.M., Azarova T.A., Shashkova I.L., Ratko A.I., Petyushik E.E., Shemchonok S.W. Recovery efficiency assessment of filtering properties of porous aluminosilicate materials by dissolving pollutant chemically
Aleksandrov V.M., Lobachev V.A., Shabalinsky A.A. Application of compact-porous materials as filters and filter elements
Ilyushchenko A.F., Baray S.G., Violenty D.R. Technology, equipment and opportunities of injection ceramic formation in the State Research and Production Institution of Powder Metallurgy of NAS of Belarus, field of goods application in the Republic of Belarus
Ilyushchenko A.F., Baray S.G., Violentiy D.R., Saevich L.M., Viskupa A.P. Modeling of repetitive structure of planar SOFC
Kurenkova V.V., Malashenko I.S. Composition solder for high-temperature soldering of high-resistant nickel alloys
Narva V.K., Shugaev V.A., Kryuchkov  Yu.N. Structure formation in sintering and properties prediction of porous nickel- and aluminium-based materials

  Poster session: at the conference hall entrance from 1100-1700
Shilko Serge, Heeman Choe, Chernous Dmitry, Petrokovets Kate, Lavochkin Vladimir Development of metal-polymer composite for cardioprostheses: application of mesomechanics, surface engineering and hemocompatibility analysis
Azarov S.M., Azarova T.A., Ratko A.I., Petyushik E.E., Belanovich A.L., Shchukin G.L. Silicate- and  aluminosilicate-based ceramic modified by  organic silicon compound
Baray S.G., Violenty D.R., Lapko K.N. Physical-chemical base to form structure and properties of nanocrystal ferromagnetic by powder metallurgy method
Baray S.G., Naydenova O.P., Shmuradko V.L., Zhilevich A.V. Ceramic capsule for stomatology
Velyugo Yu.M., Smorygo Obtaining and properties of porous ceramic biocompatible materials
Koshelev V.Ya. Development technology of closed centrifugal wheels from titanic alloy grain-powder
Kusin R.A., Kaptsevich V.M., Chernyak I.N., Kusin A.R., Zhegzdrin D.I. New sprayer design to obtain powders fine shots by air spraying
Luneva N.K., Petrovskaya L.I., Ezovitova T.I. Fire-proofing composition for metal structures
Makushok E.M., Petyushik E.E. Self-organization paradigm as a catalyst of informational possibilities for mechanical engineering technologies research, analysis and improvement
Ovchinnikov V.I. Amorphisation mechanism of metals and alloys microstructure when dynamic handling by particle jet
Savich V.V. Influence of titan powderparticles morphology on porous materials properties made of that
Sergeev L.E., Akulovich L.M., Romanova T.K., Golovkov V.V., Senchurov E.V.  Magnetoabrasive materials on superdispersed magnetite base
Shelekhina V.M., Isupov M.A., Volchek A.Ya., Dorsky A.M. Development of car brake parts from materials on iron powder base

March 27
1100-1500  Section 5 “Advanced welding technologies, materials and equipment. Improvement of normative base”
Co-chairs: Ph.D. Andreev M.A., Ph.D. BoykoI.Yu.

Andreev M.A., Ilyushchenko A.F., Radchenko A.A. Conditions of welding engineering in Belarus
Belugin K.N., Steshenkova N.A. Advanced technologies of metal working for Russian shipbuilding
Boyko I. State and chances of welding engineering in Latvia
Giro A.M., Kurtsevich F.A., Radchenko A.A. Single-phase inverter power sources 160A and 200A for manual electric arc welding 
Zankovets P.V. Dominant cooperating factors influence on welds quality
Ivanov G.A., Proncheva V.N. State and chances of welding information technologies development

1300-1320 Coffee-break
Nikitina A.S. Activating melts for butt-seam TIG-welding of steel
Oleshkevich D.A. Application of alloys containing secondary materials system Fe-Me-C-B for welding and deposition dies producing
Pobol I.L., Radchenko A.A., Tatur V.G., Selitsky V.S. Direct numerical synthesis of PWM-pattern in inverter welding current source 
Radchenko A.A., Kudinova V.P. Development of technical order “Vessels working under pressure. Safety” and legislation
Radchenko A.A., Naumenko N.F. Mechanization and automation of electro arc welding deposition processes in TEE parts and pipe rolling reconditioning  
Smirnov G.V., Petrov I.V., Komorny A.A., Bogdanovich P.T., Dzichkovsky O.A. Shaped-charged cutting by metalwares explosion

  Poster session: at the conference hall entrance from 1100-1500
Panteleenko F.I., Pisarev V.A., Zhiznyakov S.N., Sarantsev V.V. Medvedev S.V., Gusev S.V. Improvement in efficiency of protective gas flow formation in outdoor MAG-welding
1500 Summation and symposium closing